|
|
Dynaudio Or Adam?, Opinions for Rock/Pop mixing. |
|
|
|
Thu 13 Apr 2006, 10:02
|
Newbie
Group: Members
Posts: 1
Joined: 13-Apr 06
From: Haslemere - UK
Member No.: 79,106
|
Hi I just took delivery of a pair of Adam S3As and an Adam Sub12 - what a difference the sub makes! Also - make sure you have really good stands for them too, as the frequency response can be so drastically different. I've got some Quested stands. I've bought China Cones for them too - but haven't yet implimented them...
Cheers DJR
|
|
|
|
|
Fri 14 Apr 2006, 04:17
|
Moderator In Chief (MIC)
Group: Editors
Posts: 15,189
Joined: 23-Dec 01
From: Paris - FR
Member No.: 2,758
|
Dynaudio, good all-rounder, good stereo, not tiring, but depending of the room, the BM15a may be better. ADAM, pin point sound (transients to kill), good stereo, though the midfield are preferred. Their revealing tendency can be surprising. They a used in some mastering facilities. The most interesting part of the ADAM range is more expensive than the BM6a. if I had the BM6a budget, I'd go BM6a, ADAM is a better contender in the bigger models (sub no more mandatory). Now the new models may be better suited for competition. But as they were new at frankfurt, I've got to hear them still, maybe at the AES in Paris. Check the Focal too (I have yet to hear them but they're battling ground with ADAM, can't stop hearing about them)
This post has been edited by lepetitmartien: Sat 15 Apr 2006, 02:41
--------------------
|
|
|
|
|
Tue 30 May 2006, 03:25
|
Newbie
Group: Members
Posts: 6
Joined: 30-May 06
From: DE
Member No.: 80,130
|
I think that's really a matter of personal taste and also I don't know of any engineers that limit themselves to only one set of monitors.
The ADAM and Dynaudio are both excellent brands of monitors and while Dynaudio is probably best known for their unforgiving detail, the ADAM are well known for their nice midrange and smooth hi-range sound. Either one of these will give you no more opportunity to blame a bad mix on the monitors (of course you can always say that the room is lousy! :-))
And while you can talk a lot about sound, it's always best to just listen for yourself.
Good luck!
|
|
|
|
|
Tue 30 May 2006, 05:08
|
Rookie
Group: Members
Posts: 48
Joined: 13-Nov 05
From: League City - US
Member No.: 72,457
|
I do not know about ADAM monitors, but I do have a pair of Dynaudio monitors, and they are totally incredible, in their definition, precise, and pure flat quality. I mainly do alternative Christian music, but I think they would work great for any genre of music. On a 1-10 scale, I would have to give them a strong 9-10. If I had to do it again, I would purchase them again.
Good Luck In Your Selection!
Allen
[edit LPM eliminated the accidental repeat]
|
|
|
|
|
Tue 30 May 2006, 18:18
|
Moderator
Group: Team
Posts: 336
Joined: 17-Feb 05
From: La Laguna - ES
Member No.: 60,731
|
Both are in the heaven.
|
|
|
|
|
Fri 25 Mar 2011, 23:17
|
SuperHero
Group: Members
Posts: 4,781
Joined: 19-Nov 02
From: Bruxelles - BE
Member No.: 9,408
|
Citation (lepetitmartien @ ven 14 avr 2006, 04:17) Dynaudio, good all-rounder, good stereo, not tiring, but depending of the room, the BM15a may be better. ADAM, pin point sound (transients to kill), good stereo, though the midfield are preferred. Their revealing tendency can be surprising. They a used in some mastering facilities. The most interesting part of the ADAM range is more expensive than the BM6a. if I had the BM6a budget, I'd go BM6a, ADAM is a better contender in the bigger models (sub no more mandatory). Now the new models may be better suited for competition. But as they were new at frankfurt, I've got to hear them still, maybe at the AES in Paris. Check the Focal too (I have yet to hear them but they're battling ground with ADAM, can't stop hearing about them) +1
--------------------
MacPro dual 2.66 - 8 Go - SL10.6.6- DP 7.2.1 - RME FFCE 800 - URS, Sonnox, Stilwell, Nomad Factory, Kontakt 4.2.2, Trillian, Stylus, EZ drummer, SD2, UVIworkstation, Altiverb - KRK - JBL Neve 8801 - Brauner - Roland A-37, etc.
|
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
|
|