  |
 Mbox |
 Wed 15 Jul 2009, 07:37
Post
#1
|
|
|
Newbie Group: Members Posts: 2 Joined: 15-Jul 09 From: Nunawading - AU Member No.: 109,633  |
Hi everybody, I'm new here and have a question.
Just bought a new imac 2.66 24". I have the stand up version of mbox and am wondering if this is any good with GarageBand, I don't seem to be able to get it to work a all. Any suggestions would be appreciated guys.T/Y |
 |
 
|
|
Thu 16 Jul 2009, 05:39
Post
#2
|
|
 Junior Member  Group: Members Posts: 145 Joined: 24-Apr 04 From: Knoxville - US Member No.: 41,728 |
Hmm. . .
I could be wrong here, but I think ProTools hardware is proprietary, meaning you can only use ProTools software with the mBox. Therefore, I don't think you'll have any luck getting GarageBand to work with it. I use a Firebox from PreSonus for my interface. You should check it out. |
|
|
|
|
Thu 16 Jul 2009, 13:29
Post
#3
|
|
|
Newbie Group: Members Posts: 22 Joined: 03-Jun 09 From: Central Valley - US Member No.: 109,043 |
I believe you can use the MBox with other DAW's. I know people that use it with Sonar.
With GarageBand open, go to GarageBand |"Preferences" and the under the "audio/midi" tab, make sure you have selected the MBox for audio input and output |
|
|
|
|
Fri 17 Jul 2009, 07:14
Post
#4
|
|
|
Newbie Group: Members Posts: 11 Joined: 25-Oct 06 From: Madison - US Member No.: 84,590 |
I've successfully used my MBox 2 Pro with Logic, GarageBand and Digital Performer. I may be wrong, but I think it's easier to make Digi hardware work with other software than it is to use ProTools with most non-Digi hardware (I suspect M-Audio hardware may be an exception, although it may depend on the version of ProTools you have.)
|
|
|
|
|
Fri 17 Jul 2009, 08:06
Post
#5
|
|
 Junior Member Group: Members Posts: 122 Joined: 16-Jul 06 From: London - UK Member No.: 81,499 |
Make sure you have the latest Digidesign Core Audio driver from:
http://www.digidesign.com/index.cfm?langid...mp;itemid=33009 and you should have no problem using your interface with any Core Audio compliant software. You may find that you are unable to run more than one piece of audio software at the same time (eg GarageBand and iTunes), but this is normal behaviour for Digidesign gear. The rule is that you can use Digi hardware with any software, but ProTools will ONLY work with a Digidesign or appropriate M-Audio interface. -------------------- www.myspace.com/commercialmusicstudios
|
|
|
|
|
Fri 17 Jul 2009, 10:20
Post
#6
|
|
|
Newbie Group: Members Posts: 22 Joined: 03-Jun 09 From: Central Valley - US Member No.: 109,043 |
QUOTE (Jim Hoyland @ Fri 17 Jul 2009, 03:06)  Make sure you have the latest Digidesign Core Audio driver from: http://www.digidesign.com/index.cfm?langid...mp;itemid=33009 and you should have no problem using your interface with any Core Audio compliant software. You may find that you are unable to run more than one piece of audio software at the same time (eg GarageBand and iTunes), but this is normal behaviour for Digidesign gear. The rule is that you can use Digi hardware with any software, but ProTools will ONLY work with a Digidesign or appropriate M-Audio interface. What Jim says is correct. ProTools will ONLY work with a proprietary Digidesign or "M-Powered" (M-Audio) interface. |
|
|
|
 Thu 23 Jul 2009, 11:50
Post
#7
|
|
|
Newbie Group: Members Posts: 2 Joined: 15-Jul 09 From: Nunawading - AU Member No.: 109,633 |
Hi everybody,
Thanks for the advise, I downloaded the Digidesign Core Audio driver as suggested and bingo! All is well. Thanks again. |
|
|
|
|
Fri 24 Jul 2009, 06:32
Post
#8
|
|
|
Newbie Group: Members Posts: 2 Joined: 17-Feb 08 From: Spencer - US Member No.: 98,921 |
TRY THROWING OUT SYSTEM FOLDER
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
