Rme-hdsp9632 - Exp Midi I/o ?? |
Tue 4 May 2004, 02:28
Post
#1
|
|
Junior Member Group: Members Posts: 110 Joined: 20-Feb 04 From: ACT - AU Member No.: 36,296 |
RME-HDSP9632 - EXP MIDI I/O ??
Does any one know if theres a expansion Card for more midi ins/outs. My problem is that i have a control surface(mackie-Control) and a keyboard (Yamaha-Motif) And this PCI Card Only Offers 1/1 out midi interface but i need 2 does any one have suggestions Has any one got any ideas so i can run both midi i/o into the card. Would a midi merger work ?? (Midisolutions) any one got one???? If any one can shine some light on this . thanks in advance. cheers |
|
|
Tue 4 May 2004, 07:05
Post
#2
|
|
Advanced Member Group: Members Posts: 300 Joined: 21-Aug 02 Member No.: 7,031 |
You can use MIDI Thru port from the first device.
|
|
|
Tue 4 May 2004, 07:45
Post
#3
|
|
Rookie Group: Members Posts: 33 Joined: 23-Feb 04 From: Oxford - UK Member No.: 36,665 |
I run an HDSP9652 which has 2 midi ins - but ... I run about 6 midi ins to it (Piano, slave keyboard, Novation, Sync from ADAT etc.)
On one channel I use a Phillip Rees midi Merge - this is fine. On the other I use a MAudio 8x8 and this works fine too and has the added advantage of multiple midi outs for my midi rack units. Cheers Martin -------------------- Dual 2GHz PowerPC G5 / 2 x 19" Formac Monitors / Hammerfall Digi 9652 / Mackie d8b / 2.5 gig RAM
iMac G5 1.8 17" / M-Audio 1814 Firewire / Tascam TM-D1000 / 2 gig RAM Lacie Firewire Drives Logic Pro 7 / NI Battery - Guitar Rig - B4 / GMedia MTron / Crystal / LinPlug RMIV / OSX 10.3.6 |
|
|
Wed 5 May 2004, 04:33
Post
#4
|
|
Newbie Group: Members Posts: 23 Joined: 25-Feb 04 From: Montclair - US Member No.: 36,899 |
You need a midi patchbay. A simiple merger would get both outs into the computer. That might work fine. but you then need to get the out from it into both (split). A patchbay could set up both. Midiman USB has 8 ins and 8 outs with any routable to any, about $300. JLcooper used to make one that you can find on ebay for much less, well under $100 I'd think.
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members: