iMac Studio, Home HD recording with iMac |
Wed 7 Mar 2001, 13:55
Post
#1
|
|
Newbie Group: Members Posts: 1 Joined: 07-Mar 01 From: Hungary Member No.: 342 |
Hi Guys & Girls,
I'm using an iMac for home HD recording. I noticed some small delay between the iMac audio in/out. I mean if I play on my synth connected to the iMac audio in and want to hear through the iMac audio out (or headphones), the sound is coming a bit later. Even if I don't use any software (sequencer, HD recorder etc.), simply MacOS 9.1. This delay is very small, but big enough to cause problem - suppose you play in sync with anything... My questions: Is it simply because of the original iMac soundcard is slow? If yes, can you advice any other solution, how can I upgrade the soundcard (types, tech specs, prices maybe)? Thanks and happy playing, Akos jas@freemail.hu |
|
|
Wed 7 Mar 2001, 22:24
Post
#2
|
|
Member Group: Members Posts: 74 Joined: 01-Mar 01 From: Orleans - CA Member No.: 322 |
Hi, I am also using an iMac, a 333 mhz using a midiman usb/midi interface and do not have this problem. (I assume if you are already recording that you have virtual memory turned off). I have noticed this delay (sometimes known as latency), however, if I am recording and using the midi-thru option in the recording software. The way around this problem is to monitor my playing and any already-recorded tracks with a mixer. This is assuming that you are using external midi devices as opposed to software synthesizers.
-------------------- Abbie
|
|
|
Sun 20 May 2001, 21:57
Post
#3
|
|
Rookie Group: Members Posts: 41 Joined: 20-May 01 From: Port Charlotte Member No.: 658 |
I would recommend the RolandED UA-30. It has analog & S/PDIF (optical & co-ax) in and out + a guitar/mic input and a headphone jack.It will handle all a/d d/a conversion, greatly reducing the latency inherant in using the onboard audio in the iMac. You HAVE to use the UA-30 for monitoring audio when it is selected as the input device. Go to www.edirol.com for more info.
Cheers, Scott |
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members: