![]() ![]() |
![]() |
![]()
Post
#1
|
|
Newbie Group: Members Posts: 5 Joined: 27-May 08 From: Goose Creek - US Member No.: 101,333 ![]() |
Hi Everyone,
My nic name is mixman77, it's a pleasure to be able to come here and meet you guys, get advice, etc. My problem is with drum tracks. I recently transfered tracks from my reel into DP. I've done this many times with no problems. This time I have got boast in snare hits. They are random, very strange. I am the old school reel machine/console/tape splicing type. I'm new to DP but I've been getting around pretty good. What I've been trying to do is normalize the entire track or set the levels to the same loudness. For whatever reason i can't seem to find the terms or something to get this done. Any advice on how to level these tracks would be greatly appreciated. Thx in advance... Peace, Mix This post has been edited by mixman77: Tue 27 May 2008, 16:38 |
|
|
![]()
Post
#2
|
|
SuperHero ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 4,781 Joined: 19-Nov 02 From: Bruxelles - BE Member No.: 9,408 ![]() |
Hi,
first, what do you mean by "transferring from my reel?". Did you ment you recorded it on an analog way? Second, normalize won't fix your problem, if it is a level problem. What about the mixing table in DP? -------------------- MacPro dual 2.66 - 8 Go - SL10.6.6- DP 7.2.1 - RME FFCE 800 - URS, Sonnox, Stilwell, Nomad Factory, Kontakt 4.2.2, Trillian, Stylus, EZ drummer, SD2, UVIworkstation, Altiverb - KRK - JBL
Neve 8801 - Brauner - Roland A-37, etc. |
|
|
![]()
Post
#3
|
|
Newbie Group: Members Posts: 5 Joined: 27-May 08 From: Goose Creek - US Member No.: 101,333 ![]() |
Hi, first, what do you mean by "transferring from my reel?". Did you ment you recorded it on an analog way? Second, normalize won't fix your problem, if it is a level problem. What about the mixing table in DP? Hi, I recorded it to reel before I purchased my MAC and DP. Thank you for the advice... I check into the mix table. |
|
|
![]()
Post
#4
|
|
Newbie Group: Members Posts: 5 Joined: 27-May 08 From: Goose Creek - US Member No.: 101,333 ![]() |
Hi, first, what do you mean by "transferring from my reel?". Did you ment you recorded it on an analog way? Second, normalize won't fix your problem, if it is a level problem. What about the mixing table in DP? Hi, I recorded it to reel before I purchased my MAC and DP. Thank you for the advice... I check into the mix table. Well I've tried everything and nothing is working. I think I'm going to have to sequence the drums instead of using real track. bummed out. Thx for the help |
|
|
![]()
Post
#5
|
|
![]() Advanced Member ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 300 Joined: 21-Aug 02 Member No.: 7,031 ![]() |
You can use volume automation to control the snare.
Or better yet why not record the whole thing straight to DP. |
|
|
![]()
Post
#6
|
|
Newbie Group: Members Posts: 5 Joined: 27-May 08 From: Goose Creek - US Member No.: 101,333 ![]() |
You can use volume automation to control the snare. Or better yet why not record the whole thing straight to DP. I'm on the east coast and the drummer who laid the original tracks down is in LA, west cost. I would if i could. You can use volume automation to control the snare. Or better yet why not record the whole thing straight to DP. I'm on the east coast and the drummer who laid the original tracks down is in LA, west cost. I would if i could. You would think a digital computer software would allow you to make everything the same volume. Guess not |
|
|
![]()
Post
#7
|
|
![]() Advanced Member ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 300 Joined: 21-Aug 02 Member No.: 7,031 ![]() |
I have never experienced this on DP.
May be you should check the playback head on the tape. It tends to do this kind of thing. |
|
|
![]()
Post
#8
|
|
![]() Senior Member ![]() ![]() ![]() ![]() Group: Members Posts: 246 Joined: 06-Feb 07 From: Berkeley - US Member No.: 88,124 ![]() |
DP is great about spot volume adjustments. there are several ways to do it. one is the rubber band volume automation, as mentioned above.
another way is to use destructive editing. highlight the offending snare hit, and Command-Y to split it into a new soundbite. you can then use the Trim plug-in to adjust the volume of the bite, creating a new bite that replaces the old one. Alternatively, highlight the offending hit, split it, and go to the audio menu where you'll find a non destructive audio volume command. this is new, i believe. nomalizing tracks is not something I do in DP, but if you've got a need, use the the waveform editor, (built in), or an external editor. I don't believe normalizing will solve your problem. I presume you've considered slamming the track with a hard limiter... good luck! |
|
|
![]()
Post
#9
|
|
Newbie Group: Members Posts: 5 Joined: 27-May 08 From: Goose Creek - US Member No.: 101,333 ![]() |
DP is great about spot volume adjustments. there are several ways to do it. one is the rubber band volume automation, as mentioned above. another way is to use destructive editing. highlight the offending snare hit, and Command-Y to split it into a new soundbite. you can then use the Trim plug-in to adjust the volume of the bite, creating a new bite that replaces the old one. Alternatively, highlight the offending hit, split it, and go to the audio menu where you'll find a non destructive audio volume command. this is new, i believe. nomalizing tracks is not something I do in DP, but if you've got a need, use the the waveform editor, (built in), or an external editor. I don't believe normalizing will solve your problem. I presume you've considered slamming the track with a hard limiter... good luck! Hey, Thank you for the advice. I will try the things you've suggested. Thx again! |
|
|
![]() ![]() |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
![](http://static.440net.net/skins/macmusic/images/spacer.gif)