  |
 Firewire 410/forewire Problem? |
 Fri 26 Aug 2005, 21:41
Post
#1
|
|
 Newbie Group: Members Posts: 6 Joined: 23-Aug 05 From: Ohio - US Member No.: 69,040  |
Alrighty,so a couple weeks ago I purchased a 410 for my powermac g5 1.8 SP right out the box it did not work computer would not reconize it. I tried reinstalling the drivers numerous times and bought a new cable still nothing. Tech support suggested upgrading from 10.3.7 to 10.3.9. Before I did this I sent the 410 back and got a new one in the meantime I did the software upgrades.
I have never had anything else plugged into the computer that is firewire. The device does power I get the flashing blue light. When I go to the system profile I get no information for the device tree but only if the 410 is plugged in without it it's normal. The only thing I can think of is the firewire port on the computer is bad but I'm having a hard time comprehending that since it's new and I never used it before and it does power the device. Anyone got any advice before I lug the computer out to have the firewire tested? Similiar problem? Thanks. |
 |
 
|
|
Sat 27 Aug 2005, 00:00
Post
#2
|
|
 Member  Group: Members Posts: 76 Joined: 26-Nov 03 From: Del Mar - US Member No.: 29,767 |
I have a 410 on one of my Mac G5 dual 2.0, using 10.4.2. I've had problems off and on with it not being recognized when I would upgrade the OS X from various versions (10.3.x) to 10.4.x for example. You have to make sure you have the right M-Audio 410 drivers for the OS X. Have you gone to the M-Audio site and downloaded the appropriate drivers for your OS? They have a bunch of them. And then there's always the repair permissions thing. Here's the M-Audio drivers site:
http://www.m-audio.com/index.php?do=support.drivers Good luck! This post has been edited by terrywil: Sat 27 Aug 2005, 00:01 -------------------- "...I just don't know...it sounds funny."
--------------------------------------------------------------------------- Mac G5, dual 2.0 GHz, MOTU 828 MkII interface, Virus TI Keyboard, Genelec 1029A and Mackie HR824 monitors, Mackie Control Universal, Presonus Eureka and ART DPS II preamps, Presonus Central Station, AKG C1000S and C3000 mics. Logic Pro 7.2, Trilogy, Stylus, Atmosphere, Native Instruments Komplete 2. |
|
|
|
|
Mon 29 Aug 2005, 23:02
Post
#3
|
|
|
Newbie Group: Members Posts: 6 Joined: 23-Aug 05 From: Ohio - US Member No.: 69,040 |
QUOTE (terrywil @ Aug 26 2005, 23:00) I have a 410 on one of my Mac G5 dual 2.0, using 10.4.2. I've had problems off and on with it not being recognized when I would upgrade the OS X from various versions (10.3.x) to 10.4.x for example. You have to make sure you have the right M-Audio 410 drivers for the OS X. Have you gone to the M-Audio site and downloaded the appropriate drivers for your OS? They have a bunch of them. And then there's always the repair permissions thing. Here's the M-Audio drivers site: http://www.m-audio.com/index.php?do=support.drivers Good luck! I've tried reinstalling and the repair permissions numerous times. Did it take a few times of uninstalling and reinstalling to get it to work for you? I also used the most current driver for the os 10.3.9. I plan on upgrading to Tiger in the next month or two. When your computer wouldn't reconize the 410 did it do the same thing I described? |
|
|
|
|
Mon 29 Aug 2005, 23:20
Post
#4
|
|
|
Member Group: Members Posts: 76 Joined: 26-Nov 03 From: Del Mar - US Member No.: 29,767 |
Yes, I had to do the reinstall a couple of times. However, if you've done that several times, then I don't know what further to try. In addition to repair permissions, you might also repair disk, if you haven't already.
-------------------- "...I just don't know...it sounds funny."
--------------------------------------------------------------------------- Mac G5, dual 2.0 GHz, MOTU 828 MkII interface, Virus TI Keyboard, Genelec 1029A and Mackie HR824 monitors, Mackie Control Universal, Presonus Eureka and ART DPS II preamps, Presonus Central Station, AKG C1000S and C3000 mics. Logic Pro 7.2, Trilogy, Stylus, Atmosphere, Native Instruments Komplete 2. |
|
|
|
|
Mon 29 Aug 2005, 23:25
Post
#5
|
|
|
Newbie Group: Members Posts: 6 Joined: 23-Aug 05 From: Ohio - US Member No.: 69,040 |
I'm gonna sit down tomorrow and try everything a dozen more times then I guess I'll go have my firewire ports tested.
Thanks. |
|
|
|
|
Wed 31 Aug 2005, 02:28
Post
#6
|
|
|
Newbie Group: Members Posts: 6 Joined: 23-Aug 05 From: Ohio - US Member No.: 69,040 |
It's my firewire it powers but doesn't send info. at least it half works? bah
|
|
|
|
|
Fri 7 Oct 2005, 07:23
Post
#7
|
|
|
Newbie Group: Members Posts: 5 Joined: 25-Sep 05 From: Jacksonville - US Member No.: 70,446 |
i had the exact same problem with my solo. except i have a 2.3ghz /osx10.4.2 what was the diagnosis with your firewire ports? i did all the things you did, i just returned my solo though.
|
|
|
|
|
Sat 8 Oct 2005, 01:39
Post
#8
|
|
|
Newbie Group: Members Posts: 1 Joined: 22-Aug 05 From: Toronto - CA Member No.: 69,024 |
QUOTE (martiansrevenge @ Aug 26 2005, 20:41) The device does power I get the flashing blue light. Not to be a jerk or anything, but did you switch the power for the 410 on? You're correct in that the (slow) flashing blue light indicates a firewire link between the 410 and your G5, a solid blue light indicates that the 410 will actually "work" (ie: audio in and out). I've had some problems beating the 410 into shape with my iMac G5 running Tiger, but I think I've figured out most of it's idiosyncrasies. |
|
|
|
|
Sat 8 Oct 2005, 12:31
Post
#9
|
|
|
Rookie Group: Members Posts: 39 Joined: 30-May 05 From: Lyon - FR Member No.: 66,263 |
I bought a FW Solo and couldn't make it work unitl I realized I had to opent the System Prefeference > Sound and set the Input and the Output to right device.
Then, the drivers interface is far from intuitive but you eventually can get around. |
|
|
|
|
Sun 9 Oct 2005, 16:08
Post
#10
|
|
|
Rookie Group: Members Posts: 36 Joined: 11-Mar 04 From: - CL Member No.: 38,206 |
Sold my 410 , saved a few bucks and bought a 828mkII ( 410 was a pain in the arse )
|
|
|
|
|
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
