MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visitors connected
Welcome Guest
 
Reply to this topicStart new topic
> Help! Why Is My Microphone So Quiet????
mushyosh
post Mon 7 Feb 2005, 13:11
Post #1


Newbie


Group: Members
Posts: 2
Joined: 07-Feb 05
From: Bournemouth - UK
Member No.: 59,952




I thought this was a sound card problem, so i went and baught a good soundcard (M-Audio Revolution 5.1) but still have the problem:

When I plug my Mic in and speak into it, it is very very silent. I have turned up all input levels to max and still i have to scream into it for anything to register at all.

Does anyone have an idea of what the problem is?

Any help would be greatly appreaciated.
Go to the top of the page
 
+Quote Post
lepetitmartien
post Mon 7 Feb 2005, 16:59
Post #2


Moderator In Chief (MIC)
Group Icon

Group: Editors
Posts: 15,189
Joined: 23-Dec 01
From: Paris - FR
Member No.: 2,758




Is the In a preamped one? If it's a Mic In (so with a preamp) there's something wrong or badly set up, if it's a Line In you need a preamp between the mic and the In.

What mic is it? Has it a pad? If so, check it's not on. cool.gif


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post
NBailey
post Mon 7 Feb 2005, 18:44
Post #3


Newbie


Group: Members
Posts: 10
Joined: 13-Aug 03
From: Chicago - US
Member No.: 22,902




I guess I should ask the obvious first. Is it a condenser mic? If so, do you have the phantom power on?
Go to the top of the page
 
+Quote Post
nickmonster
post Thu 10 Feb 2005, 08:19
Post #4


Newbie


Group: Members
Posts: 7
Joined: 23-Jan 05
From: Upland - US
Member No.: 59,002




might be a bad mic cord (had the same thing happen) or a bad mic all together... did you check each component?
Go to the top of the page
 
+Quote Post
tross
post Fri 13 Jan 2006, 05:52
Post #5


Newbie


Group: Members
Posts: 16
Joined: 05-Jan 06
From: Elgin - US
Member No.: 74,862




I've got the same problem of a quiet signal with feedback in the background. Can anyone help me out?
Go to the top of the page
 
+Quote Post
mortalengines
post Sat 14 Jan 2006, 22:01
Post #6


Advanced Member
*****

Group: Members
Posts: 479
Joined: 08-May 05
From: Portland - US
Member No.: 65,373




I just checked the website for the Revolution 5.1. You will need a microphone pre-amp to get much of any signal out of your mic before going into your computer. If it helps, Presonus makes a pretty good preamp for under a hundered bucks. I think that ART makes a preamp that sells for around 30 bucks. Microphones don't make much signal (neither do guitars, tape decks, turntables, etc) so you need to boost the signal before going to a recording device. I would almost suggest getting a small mixer to meet all of these needs if you want to stay with the particular sound card that you have chosen. Behringer makes some cheap ones (ok, but not great) & Soundcraft & Mackie make some REALLY good ones for the money (I have a Soundcraft Compact 4 that ran around a hundred bucks & has 2 good mic preamps & a turntable preamp, & a couple of balanced & unbalanced inputs & man...I love this thing). So, you either need another sound card or you need to spend a little more money on a mic pre.

This post has been edited by mortalengines: Sat 14 Jan 2006, 22:02
Go to the top of the page
 
+Quote Post
miaba
post Tue 17 Jan 2006, 17:09
Post #7


Rookie
*

Group: Members
Posts: 43
Joined: 17-Oct 05
From: Toledo - US
Member No.: 71,372




i can relate, somewhat. i have a sm58 into a firebox and with the preamp completely cranked, it still doesn't have the signal i would expect. i tested the mic and chord through a tascam four track and it worked well. infact i could hear the room ambience and passing cars outside, something that didn't come through in the firebox. i do like the firebox but at the level i need from it, it produces some noise that i have to e.q. out on every track. somewhere around 1k.
Go to the top of the page
 
+Quote Post
rickenbacker
post Wed 18 Jan 2006, 13:06
Post #8


Maniac Member
******

Group: Members
Posts: 645
Joined: 17-May 02
From: Broughton
Member No.: 4,705




The Firebox preamps are pretty quiet. Good quality, but quiet. FMR Audio's Really Nice Preamp is a little more expensive than other recommendations here, but is very, very nice. And very, very loud.
Go to the top of the page
 
+Quote Post
tross
post Wed 18 Jan 2006, 14:30
Post #9


Newbie


Group: Members
Posts: 16
Joined: 05-Jan 06
From: Elgin - US
Member No.: 74,862




I tried using a preamp and the volume goes up but so does the background noise, rediculously. I think my problem is running Mac Os X on a G3, which is why I'd like to downgrade to Mac Os 9.2.
Go to the top of the page
 
+Quote Post
rickenbacker
post Thu 19 Jan 2006, 11:22
Post #10


Maniac Member
******

Group: Members
Posts: 645
Joined: 17-May 02
From: Broughton
Member No.: 4,705




Background noise is surely a mic/preamp issue, not an OS X/G3 issue.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 

Lo-Fi Version - Sun 1 Dec 2024, 23:56
- © MacMusic 1997-2008