440 Forums > English > Mac Music > Audio, MIDI, DSP Cards and Interfaces, Controllers > Other Controllers, Interfaces, DSP Cards  |
 Asio Error! Not Enough Memory!! Repost-sorry, Logic 4.7 with Emagic 2|6 audiointerface |
 Wed 24 Jul 2002, 20:42
Post
#11
|
|
|
SuperHero  Group: Banned Posts: 1,879 Joined: 24-Feb 02 Member No.: 3,562  |
Weird...
My last thoughts: -if you had a similar problem with a quattro, the emi is probably not the culprit (good news, isn't it?). -reconfigure oms and save again (dunno if logic needs it?) -try to get the hand on another sequencer, like cubase, dp, or such. Try it with the same asio driver. If it works, i would say logic installation is the problem (or a logic/system thing). If it doesn't... well, if i were you, i would backup every datas, erase the system disk, and reinstall a clean os 9.2.2... -if it still fails, well it's probably hardware, and i can't help here, sorry... Good luck. Bye. |
 |
 
|
|
Thu 25 Jul 2002, 01:04
Post
#12
|
|
 Moderator  Group: Team Posts: 508 Joined: 09-Jul 02 From: Sydney - AU Member No.: 5,658 |
Open "Apple System Profiler" from the apple menu
Click on the "devices and volumes" tab. Look next to USB and see if the emi 2/6 is shown. Are you running the emi directly from the computer's USB port or via a hub? If from a hub, it has to be powered or the emi 2/6 will not get enough power to run (nor would the quattro). Matt |
|
|
|
|
Thu 25 Jul 2002, 14:28
Post
#13
|
|
 Newbie Group: Members Posts: 10 Joined: 18-Jul 02 From: Detroit - US Member No.: 6,023 |
Alright,
Maybe It was a combination of all the things suggested (updating to 4.8.1, new emi drivers, disabling sound manager extension, making sure 'usb audio device' checkbox is checked, lowering/upping memory assignment, reinstalling oms, checking out system profiler...etc etc etc!!!) but SOMEHOW the emi is FINALLY WORKING!! no "not enough memory" error on startup of Logic. *round of applause for everyone* Can I take you all out to dinner or something? ^_^ One more question though (and this may have been asked before) Why are the signal levels so low? When I have my source of sound up all the way, it only shows a SLIGHT signal on both the emi and in Logic's audio mixer. Anything i can do to fix this? You all have been great help, thanks again. Jennifer |
|
|
|
 Thu 25 Jul 2002, 19:52
Post
#14
|
|
 Advanced Member Group: Members Posts: 393 Joined: 11-Jun 02 From: London - UK Member No.: 5,044 |
hey, see how easy all of this is!
 these "signals". could they be, mic inputs that aren't being amplified through mic pre-amps?  this seems to be the most obvious cause of such a problem, but if this is not the case, more info, pretty please...
-------------------- one for all and all for one...
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
