  |
 Mac Using Logic As Sequencer |
 Thu 23 Feb 2012, 06:03
Post
#1
|
|
|
Newbie Group: Members Posts: 6 Joined: 21-Feb 12 From: Bristol - UK Member No.: 119,938  |
Can anybody out there give me the steps to be able to use my Mac+Logic to be able to `MTC` (midi time code) an external 24 track Tascam 2488Neo digital recorder.
|
 |
 
|
|
Fri 24 Feb 2012, 14:08
Post
#2
|
|
 Newbie Group: Members Posts: 3 Joined: 24-Apr 11 From: Akron - US Member No.: 117,560 |
QUOTE (snudge @ Thu 23 Feb 2012, 00:03)  Can anybody out there give me the steps to be able to use my Mac+Logic to be able to `MTC` (midi time code) an external 24 track Tascam 2488Neo digital recorder. Mine is a bit different of a setup than yours. I am running MOTU Digital Performer through a 828 MKII for A/D-D/A conversions. I use the MOTU Time Piece to route MTC to different devices and it works great. It also has a 9-pin output for controlling SONY decks. And it has TC outputs to go directly to outside devises. for slaving machines or A-Dats. Here's something I found on another forum; Syncing a 2488 to logic-8 Might help you some??? |
|
|
|
|
Fri 24 Feb 2012, 16:15
Post
#3
|
|
 Senior Member  Group: Members Posts: 246 Joined: 06-Feb 07 From: Berkeley - US Member No.: 88,124 |
assuming the tascam digital deck outputs MTC on a standard midi cable, this shouldn't be difficult.
set the deck up as a midi device to your midi interface, and verify it's transmitting MTC. in Logic, there will be a 'slave to sync' command or mode, with several choices. choose midi time code. put Logic in play, and it will be in standby. roll the deck, it'll run. it's been a while, but we used to sync our MOTU Performer files (midi only) to SMPTE audio stripes all the time. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
