Tascam Us-122 On Os 10.4.10, How can I use this usb device on this new computer Options

[thamoon]

I just got a new powerbook OS 10.4.10 and my Tascam US-122 is not being recognized at all through the usb ports. Old story, I used to use it with the old Powerbook G4 no problem.

I wonder if it has something to do with them being usb2 and the unit being usb1? I also havn't been able to find a driver for this model?

Could you offer me any help? Big thanks

[deaconblue]

thamoon,

USB2 ports are normally backwards compatible. Most likely you'll need the drivers. You can find the drivers on Tascam's US-122 resource web page off their legacy products link.

Hope that helps.

peace

[Rhsilverberg]

I just got a new powerbook OS 10.4.10 and my Tascam US-122 is not being recognized at all through the usb ports. Old story, I used to use it with the old Powerbook G4 no problem.

I wonder if it has something to do with them being usb2 and the unit being usb1? I also havn't been able to find a driver for this model?

Could you offer me any help? Big thanks

Was curious about your question myself as I recently did the upgrade to 10.4.10. I've experience no troubles on my G5 iMac with the US-122. But I do note that there is a Universal Binary driver posted (version 3.4.0) which also happens to be the driver that I updated to a little bit ago. That's a good starting point, IMO.

Roger

[thamoon]

Thanks for the replies, I'll check into the drives again. They just weren't uploading from the internet - and the Tascam site no longer had the drivers for this model. They have drivers for the new US-122L which is not compatible. will give it another go.

thamoon,

USB2 ports are normally backwards compatible. Most likely you'll need the drivers. You can find the drivers on Tascam's US-122 resource web page off their legacy products link.

Hope that helps.

peace

This web link doesn't seem to be active anymore - could you give it a try? thamoon

[deaconblue]

Thanks for the replies, I'll check into the drives again. They just weren't uploading from the internet - and the Tascam site no longer had the drivers for this model. They have drivers for the new US-122L which is not compatible. will give it another go.

thamoon,

USB2 ports are normally backwards compatible. Most likely you'll need the drivers. You can find the drivers on Tascam's US-122 resource web page off their legacy products link.

Hope that helps.

peace

This web link doesn't seem to be active anymore - could you give it a try? thamoon

thamoon,

I just used the link within the quote and it took me to the US-122 page. Just in case, here they are again.

peace.

[Flando]

I upgraded to a MacBook Pro & had the same problem & called Tascam, & they gave me the web page to get the latest upgrade drivers for the intel computer. It works flawlessly. It should work for OS 10.4.10 (as mine is 10.4.11)

Here's the way to get to it on the Tascam.com web page:

Go to tascam.com
Go to Products in the menu bar on top of the page & go to Legacy
Go to Computer Products & click on Interfaces/Controllers
Go to the US 122 picture, click on it & go to the download that fits your computer.

Hope this helps! Happy recordings!
Flando