MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visitors connected
Welcome Guest
 
Reply to this topicStart new topic
> System Overload In Logic 4.7, help!
post Mon 29 Jul 2002, 18:11
Post #1





Group:
Posts: 0
Joined: --
Member No.: 0




OK...I'm a newbie running an 800 MHz TiBook with 512 RAM on 9.2 (and using an 828)...I'm running Logic 4.7 and Reaktor 3.007, and on Logic I'm running an audio track, Reaktor, a few FX plug ins, and about 7 VSTi's. When the song gets to the part with the Reaktor patch (and all the other VSTis) I get a dropout and the message "ASIO: System Overload. The audio engine was not able to process all required data in time"..I assume this is a processor problem and not a memory issue? Maybe I was naive but I was expecting more from the 800 TiBook. What can I do (other than bouncing plug-ins to disk) to ease this up. I guess more RAM wouldn't help? My Reaktor ensemble is using 20% of the CPU after being stripped down, and memory for Logic is (Min:200558K, Pref:256000K), and Reaktor is (Min:58976, Pref:83976)...my drive is partitioned, vir. mem. off, extensions stripped...all that stuff. I'm just unsure of my memory settings, and whether or not my processor just can't cut it. Is a VSTi really that much more taxing than an audio track?
I've followed EVERY tip in both the computermusic.co.uk article and the post on this forum about 9.2 tweaks...which brings me to last question...computer music says to keep default cache, and the post on this forum says to drop down to 512, which is substantially lower...which is right?
Please help a misled ex-Win98 user...
Gray
Go to the top of the page
 
+Quote Post
lepetitmartien
post Mon 29 Jul 2002, 22:32
Post #2


Moderator In Chief (MIC)
Group Icon

Group: Editors
Posts: 15,189
Joined: 23-Dec 01
From: Paris - FR
Member No.: 2,758




Check:

http://www.macmusic.org/agora/forums/index...9118a3d&lang=FR

In case there's an answer wink.gif (not sure but try)


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post
formatj
post Tue 30 Jul 2002, 02:21
Post #3


Moderator
Group Icon

Group: Team
Posts: 508
Joined: 09-Jul 02
From: Sydney - AU
Member No.: 5,658




You are correct in assuming it is a processor problem not a memory issue.
VST instruments can be very processor hungry. It depends on which ones you use (Reaktor can be especially) and can even change depending on the particular sound you use within a synth (number of oscillators used, FX on/off etc).

Open a new Logic Song and then open the "system performance" from the "Audio" menu. Now add a vsti and look at the Audio performance. When you play some notes from your keyboard you will notice that it uses more processing the more notes you play at once.
You will also notice that if you record some notes and then select another track on the arrange page (not a VSTi) that this will drop the processor usage slightly.

There is not much you can do to increase performance except for bouncing tracks to disk. Also, as stated above, make sure when you play a Logic song that has heaps of plugins that you don't have a vsti track selected in the arrange window.
Increasing your buffer size will also help your problem slightly.

Do not change change your cache setting to 512k. Emagic recommends you keep it set to "default".

Search through or join the logic users group for more info and tips on logic.
http://groups.yahoo.com/group/logic-users/

HTH

Matt
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Lo-Fi Version - Thu 5 Dec 2024, 14:53
- © MacMusic 1997-2008