  |
 Carte Rme Rpm Et Powerbook !!!!, Problème d'installation |
 Fri 3 Dec 2004, 11:13
Post
#1
|
|
 Newbie Group: Members Posts: 4 Joined: 17-Jun 03 From: Jambes - BE Member No.: 19,798  |
Pas moyen d'installer cette carte audio firewire sur mon powerbook! (os x 10.3)
Je suis les instruction (en anglais ) concernant les drivers du mieux possible .... rien a faire Si quelqu'un a une idée... merci |
 |
 
|
|
Fri 3 Dec 2004, 12:36
Post
#2
|
|
|
Maniac Member  Group: Members Posts: 665 Joined: 08-Nov 02 From: - FR Member No.: 9,113 |
RPM?????
la seule carte firewire de rme c'est pas la fireface??? |
|
|
|
|
Fri 3 Dec 2004, 13:32
Post
#3
|
|
|
Newbie Group: Members Posts: 4 Joined: 17-Jun 03 From: Jambes - BE Member No.: 19,798 |
|
|
|
|
|
Fri 3 Dec 2004, 13:50
Post
#4
|
|
|
Maniac Member Group: Members Posts: 665 Joined: 08-Nov 02 From: - FR Member No.: 9,113 |
ben oui, justement - sur le site RME: (http://www.rme-audio.com/english/hdsp/cardpci.htm)
For some time now, laptops have become powerful enough for even ambitious hard disk recording thanks to high computing power and powerful hard drives. Up to now, a powerful interface was missing though. USB is neither offering the necessary bandwidth, nor the desired compatibility. Available PCMCIA solutions at the moment are nearly always designed as 16 bit PC Card and therefore only make use of the ISA bus. For the Hammerfall DSP I/O-boxes Digiface, Multiface and RPM, RME have developed a world-exclusive PCMCIA type II card in Zero wait state CardBus Busmaster technology. With up to 130 MB/s transfer rate in both directions the same basic performance is provided on a notebook as a PCI card would offer on a desktop computer. Additionally the card offers highest compatibility by being 100% Plug & Play compatible under Windows and Mac OS, and being able to share interrupts. The card itself will only use one interrupt (IRQ) for all functions (audio/MIDI.) The connection between CardBus card and I/O box is established using ordinary firewire cable (closed LAN to IEEE 1394.) The data transfer does not use Firewire protocol, but our own proprietary bus protocol. The supplied cable is 4.5 m (15 ft.) long, a cable length up to 10 m (33 ft.) has been successfully tested. The CardBus card does not provide power to the attached I/O-box. Therefore a hi-tech switching power supply is included. ********************* en gros la rpm n'est PAS une carte firewire, elle a besoin soit d'une carte pci (sur le tours) soit une carte pcmcia sur le portables ils disent d'ailleurs que la prise urtilisée (voire le cable) est FWire, mais PAS le protocole, qui lui est propiétaire sur le pbook il faut que tu achetess la carte pcmcia |
|
|
|
|
Fri 3 Dec 2004, 15:27
Post
#5
|
|
|
Newbie Group: Members Posts: 4 Joined: 17-Jun 03 From: Jambes - BE Member No.: 19,798 |
Merci pour toute ces précisions
 Je retourne chez mon veudeur pour une autre solution 
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
