Unable To Record Using M-audio Firewire 410 Options

[macphile]

Perhaps somebody can shed light on my problem here. I have
installed a Firewire 410 on a G5 (dual processor). The interface
seems to be working fine -- it is detected, and the audio
is routed to it (input and output). I am trying to record
an incoming SPDIF bitstream. The bitstream is correctly
detected (sample rate etc.). When I look at the sound
preferences menu, the sound input is displayed on the
bar graph in the Apple settings.

But, despite all this, I am unable to find any program that
can actually record the incoming bitstream. I have tried
half a dozen programs, to no avail. Spin Doctor 2 does not
even recognize the settings with Firewire 410.

I tried Audacity, Bias Peak, and a couple of freebie audio recorders.

I can playback the sound using my headphones connected to the
Firewire 410, but I am unable to record the bitstream.

Any suggestions would be appreciated!

- Sridhar

[borjam]

Have you selected the correct input in the program?

I have recorder SPDIF audio from a Firewire 410 from DSP-Quattro, and I have had no problems.

I just must select the correct inputs; The Firewire 410 offers 4 inputs: inputs 1 and 2 are the analog inputs, and inputs 3 and 4 are the SPDIF inputs.

For example, in Amadeus II you should select the Firewire 410 as the audio input (using CoreAudio drivers) and you can select each individual input you assign to the left and right channels.

Open the Audacity preferences, and tell it that you are going to record 4 inputs from the Firewire 410. It should record two silent channels (1 and 2) provided you have nothing connected to the analog inputs (quite noisy if you are not feeding a SPDIF signal, as the clock is external in that case), and two audio channels, 3 and 4.

Try it and tell us if it works