  |
 Mac G4, QUESTION HOW TO CHANGE FROM TIGER TO JAG |
 Mon 9 Jan 2006, 01:38
Post
#1
|
|
 Newbie Group: Members Posts: 1 Joined: 09-Jan 06 From: San Jose - US Member No.: 74,999  |
My question is why a mac G4 X0S TIGER after been formated cant install mac X0S v10.2 JAGUAR to run DIGI 001 ...
I APRECCIATE if any body knows thanks |
 |
 
|
|
Mon 9 Jan 2006, 02:34
Post
#2
|
|
|
Rookie  Group: Members Posts: 43 Joined: 04-Nov 05 From: Pasadena - US Member No.: 72,118 |
TMM, I'm not sure exactly what you are asking? Are you saying that you bought a g4 with 10.4 Tiger on it and then tried to use Digi 001??? I'm not totaly sure, but the latest PT LE version that works with Digi 001 is LE 6.4. And LE 6.4 will not work with 10.4(I think). You'll have to reboot (is that the right terminology?) the g4 with 10.3.x. I currently use the Digi 001 with LE 6.4 on 10.3.8 and it works great. Good Luck!
If anyone else sees that I have said something incorrect, please correct me! This post has been edited by mixfisto: Mon 9 Jan 2006, 02:36 |
|
|
|
|
Mon 9 Jan 2006, 06:32
Post
#3
|
|
|
Member Group: Members Posts: 94 Joined: 21-Dec 02 From: Shelton - US Member No.: 10,225 |
You can't downgrade your OS. If you want to run in 10.2 then you will have to reformat your hard drive booting from the 10.2 install disk by holding down the C key after you restart with the 10.2 CD in your drive and on the desktop. If you want to boot into either 10.2 or 10.4 then you'll need to create two hard drive volumes for each version of the OS. Then you can switch from one OS to another using Startup Disk in the System Preferences.
|
|
|
|
|
Mon 9 Jan 2006, 20:30
Post
#4
|
|
 Maniac Member Group: Members Posts: 899 Joined: 12-Oct 01 From: Kirkland Member No.: 2,002 |
It depends on when the Mac was made. You cannot install a version of the OS that is earlier than the version it was shipped with.
So the version that is on the original install disk, is the oldest you can use. 
-------------------- G-Dub
|
|
|
|
|
Thu 12 Jan 2006, 19:09
Post
#5
|
|
|
Newbie Group: Members Posts: 23 Joined: 12-Jan 06 From: Hyères - FR Member No.: 75,214 |
Hi,
I have a G4 notebook with the Mac OS X software. I recently installed Protools with the MBox Factory system. It runs ok-ish but it has started crashing recently and also, if I try to create a Midi track, it crashes too. Is this because I need an older version of the Mac software? Am seriously thinking of reverting to Windows... M |
|
|
|
|
Thu 12 Jan 2006, 20:05
Post
#6
|
|
|
Maniac Member Group: Members Posts: 899 Joined: 12-Oct 01 From: Kirkland Member No.: 2,002 |
need more information maziz, OS version, PTLE version, model computer, RAM, available HD space???
Start a new thread with a specific question. It's one of easiest systems if you follow Digidesign's instructions.
-------------------- G-Dub
|
|
|
|
|
Fri 13 Jan 2006, 09:20
Post
#7
|
|
|
Newbie Group: Members Posts: 23 Joined: 12-Jan 06 From: Hyères - FR Member No.: 75,214 |
OK,
The OS X version of Mac is 10.4 The PTLE version is: 6.8.1 (on MBox 2Factory) The model of the notebook is powerbook 5,8 , with a capacity of 74, 41Go of which I have used 25,72 so I have 48,69 left to use on the HD. Can't find the RAM number. I started having problems with Protools AFTER I loaded up a ton of CDs on my IPod. Infact, I had no problems with it crashing prior to that. Is this enough information? I also have a problem with launcing some of the software on Protools, like, I can't get my midi keyboard to register a sound although I can SEE the midi signal, but...that' another story... cheers, Miriam |
|
|
|
|
Fri 13 Jan 2006, 09:24
Post
#8
|
|
|
Newbie Group: Members Posts: 23 Joined: 12-Jan 06 From: Hyères - FR Member No.: 75,214 |
NB:
The RAM is: 512 Mo DDR2 SD RAM, on a 1.67 Ghz processor. The version of Mac OS X is 10.4.3 M |
|
|
|
|
Fri 13 Jan 2006, 18:19
Post
#9
|
|
|
Maniac Member Group: Members Posts: 899 Joined: 12-Oct 01 From: Kirkland Member No.: 2,002 |
According to the Digidesign site PTLE7 is the only version compatible to your OS, if your machine came with OS10.3.x
You can revert to the older OS to run your current version, otherwise you would have to upgrade to 7. also 512MB is barely enough RAM to run the OS, with that amount of RAM you force the OS to use part of your hard drive for virtual memory. Not a good thing when you're trying to do hard disk recording. Thats what I would look at first upgrade PTLE, go up to a minimum of 1GB RAM.
This post has been edited by gdoubleyou: Fri 13 Jan 2006, 18:23 -------------------- G-Dub
|
|
|
|
|
Sat 14 Jan 2006, 21:37
Post
#10
|
|
 Advanced Member Group: Members Posts: 479 Joined: 08-May 05 From: Portland - US Member No.: 65,373 |
As quickly forward as everything (Mac & PT) seems to be moving I would not consider backtracking on my OS...Pro Tools has a version for 10.4 & it is a 99 buck upgrade that includes two free plug ins of your choice (some of which are quite costly at this point. I am at 10.3.5 & there is already some stuff (quicktime files) I can't run until I move over to 10.4. If it wasn't such a pain (time, money & effort) to do the initializing of my HD for the 10.4 upgrade I would have done it already.
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
