Help! Tasc. 122 Fried My Usb Ports! Options

[Philryan]

I just bought the Tascame US-122 yesterday, and it was working fine - sort of. i figured out that i needed to add power to my USB hub, since it wasnt powered already. after i hooked up an AC adapter to it, my computer will no longer recognice any USB device, except the US-122! My oxygen 8 will no longer power up or be recognized by my computer. My USB hub powers up, and my mouse lights up, but the computer wont recognize either of them. What's worse, is that my compuiter will no longer recognize my logic xskey! i am running panther 10.3.2 on a titanium powerbook G4 550mhz with an external HD. all drivers for the devices are fully installed. any help is very much appreciated. thanks all....

phil

[editbrain]

to reset your need to turn the powerbook off. then power it on and hold down option, apple, P and R

this is kinda hard. it takes two hands. also you have to have them pressed and hold them. you will hear the chime (bong) keep holding the keys you will hear the bong again real quite. keep holding you want to let the bong chime at least 3 time. i would suggest 5 times.

after the fifth time you can let loose of the keys. it will boot as usual.

also you can reset the nv-ram. you boot holding the option, apple, O and F keys all at one time.

you will see the mac bios screen. at the prompt you type reset-nvram and press enter. then type reset-all. the mac will reboot as usual.

happy recording,

jeremy

This post has been edited by editbrain: Mon 1 Mar 2004, 23:24