 Static Is Killing Me, Using The Scientific Method |
 Sat 31 Jan 2004, 20:44
Post
#1
|
|
 Newbie Group: Members Posts: 3 Joined: 31-Jan 04 From: San Francisco - US Member No.: 34,578  |
I'm wondering if some of you might be able to offer me some suggestions as to eliminate some static in my recordings.
My Setup: I've got a 800 MHz G4 running 10.3.2 with 1.5 GB RAM and an Echo Mia PCI sound card which is connected to a Behringer Eurorack UB1202 mixer which has a single Shure SM58 microphone plugged into it. I'm using Deck for all of my recordings. I have all of this plugged into a UPS, which is then plugged into my wall. My Problem: Anytime I record with this setup, I get frequent static noises. I bought the UPS because I thought that the power from the utility company was causing the problem. After hooking up the UPS, I found no change in the frequency of the static. However, when I record using the cheap little microphone that came with my computer, I get no static on the recordings. This suggests to me that it is my setup with the sound card, mixer and microphone. What's really frustrating is that I avoided getting a USB interface for recording so that I wouldn't have the seemingly common static problems associated with USB. My Question: Is there an easy way for me to figure out where this static is coming from (within the sound card, mixer or microphone) without having to buy any more equiptment? I don't have access to another set of these components, so I can't just swap other ones in place of mine to test. I also can't return the sound card, mixer or microphone, so I'm stuck with them. Is there a likely culprit that is causing my problems? Has anyone else solved a similar problem? Or does anybody have a better suggestion in how to connect a XLR plugged microphone to a computer for relative cheap? If so, I've got a virtually unused sound card and mixer for sale cheap! |
 |
 
|
 |
Replies
|
Sun 1 Feb 2004, 09:36
Post
#2
|
|
|
Member  Group: Members Posts: 71 Joined: 29-Oct 03 From: Corvallis - US Member No.: 27,749 |
This may sound strange, but di dyou ever try burning a disc after recording to your hard drive? I have had issues of clicks or ticks, similar to static, whan I have tranfered a DAt to my hard dirve via my EgoSys waverterminal 2496 > Cubase 5.o vst, or if I use Peak. I ened up re transerfing and recording anumber of time and finally gave up an burned a disc and it sounded fine. Possibly something to do with latency??/ I do not know? I currently run a G3 "enabled" 450mhz / 1mb L2 cache Mac Clone (Power Computing) with 448mhz of RAM.
possibly it could be a lcak of har drive speed. now as long as my trensfer is succesful , I put in track marks and burn a "test" disc, then I listen to it , usually there are not ticks or clicks. don't know if this helps but I just thought I'd put it out there. -- Ian aka ArchivalAudio -------------------- ~ Archival Audio ~
Archiving Worthy Music since 1986 & digitally since 1995 Field and location recording iBook G4 1.2Ghz/ 1.2GB - MOTU UltraLite & Audiodesk | Fostex FR2-LE (currently stock) Milab VM-44 Links | RODE NT5's | AT853a's C/SC | Naiant MSH-2's | other assorted mics Mackie 1402Vlz | Fostex D-5 DAT =============================== For sale make me an offer : PM me Denecke AD-20 | Presonus FireBox OLD School: Mac Clone (PowerComputing PowerCenter Pro) G3 enabled 450mhz/512MB EgoSys waveterminal 2496 - Cubase VST 5.0 Peak,Jam etc! ;) Fostex D-5 DAT |
|
|
|
Posts in this topic
sfsurfer Static Is Killing Me Sat 31 Jan 2004, 20:44
lepetitmartien The noise source is either a noisy power unit some... Sat 31 Jan 2004, 22:45 Nels Lepetitmartien has pretty much covered all that co... Sun 1 Feb 2004, 03:07 lepetitmartien If you have this on monitoring and not on the burn... Sun 1 Feb 2004, 19:54 PristineRec To put a completely different area into question h... Sun 1 Feb 2004, 21:35 lepetitmartien It can be… sure…
Another cause not listed here of... Mon 2 Feb 2004, 00:02 zelen0 are you so certain the static is caused by your se... Mon 2 Feb 2004, 06:23 zelen0 One thing worth metioning as well is that not all ... Mon 2 Feb 2004, 06:24 lepetitmartien I think he put the UPS in the circuit in case it w... Mon 2 Feb 2004, 18:31 zelen0 what I meant to ask was, does that particular UPS ... Mon 2 Feb 2004, 19:53 sfsurfer Thanks so much for all the suggestions! I... Mon 2 Feb 2004, 23:47 lepetitmartien (head scratching)
well… it may be something in th... Tue 3 Feb 2004, 19:41
sfsurfer Well, everyone, I'm sorry that I didn't ge... Wed 11 Feb 2004, 04:24 |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
