Midi Thru Help, need to hook to physical synths to mac Options

[HITdrumHARD]

Equipment:
Mac G4 (OS9)
Digi001 w/Pro Tools LE
Kurzweil K2600xs
Korg 01w/fd

Problem:
I have been using this set up minus the Korg for a couple years, and now I decided to dust off the korg and include it in the mix, but my basic midi theory is failing me.

I want to use the K2600 on channels 1-8, and the Korg on 9-16, to avoid doubling up.

I also want to use the k2600 as the controller for both synths. I know its possible, but something in my set up isn't right.

Symptoms:
I have the K2600 hooked as the Midi IN and the Korg as the THRU back to the digi001.

Even with local control off on the Korg, it still responds on whatever channel the K2600 is using to send. I solved that by disabling channels 1-8 on the korg. however, when I select one of the Korg tracks in Pro Tools, set to anything from 9-16, I get midi reponse showing in Pro-Tools, but no audio.

My instinct tells me this is because I also disabled channels 9-16 on the K2600, and it isn't passing through commands on those channels to the korg for that reason. If that is true, it means I have to ENABLE channels 9-16 on the korg during recording, and then DISABLE them during play back.

That can't be the only solution... anyone have experience with this?

Thanks in advance!

Andrew G

[walt]

The ONE imid in/out ports of the Digi 001 is intend to be used as a midi interface to handle only ONE midi device ( synth, drum, sound module
etc.)

Your work around is certainly one big pain in the studio.

Remember that ProTOOLS is truly not a midi sequencer. If it was it would have midi notation and list edit to make life easy when we make mistakes in recording those midi tracks. At the moment all it can do is midi in meta
format. In professional studios they do the "midi" stuff using programs such as Cubase, DigitalPerfomrer and then import the smidi file into ProTOOLS.