Tascam M-2600 Mkii |
|
|
|
Mon 10 Sep 2007, 20:14
|
Newbie
Group: Members
Posts: 6
Joined: 19-May 07
From: Copenhagen - DK
Member No.: 91,308
|
Does anybody remember this 10 year old model from tascam? I'm currently thinking of buying one, but the guy who's selling it does'nt know anything about it.
As I recall it had tape in on every channel and something called group out, but is the group out just a direct out (maybe even with a fader/gaincontrol)from each channel allowing me to hook it up to my tape machine or RME pre+converter?
Any usefull info would be nice. Thanks.
Best regards
|
|
|
|
|
|
Replies
|
Thu 16 Apr 2009, 21:13
|
Newbie
Group: Members
Posts: 2
Joined: 16-Apr 09
From: Columbia - US
Member No.: 107,977
|
I have recently obtained a Tascam M-2600 MK II Mixing console. As I was hooking up and testing the console today I have run into a few issues. First issue is that when I first turn the system on I get a very loud squeeling sound coming from my control room monitors. The squeeling gets higher pitched and then finally goes away after about 2 -3 minutes that the console is on. Second, I am getting a good bit of static from the console through my control room monitors and through the mains. While using the console there seems to be a "sweet spot" between the L-R main fader and the volume pot for the control room monitors. What I mean by this is that I can set the L-R fader at a certian level and turn the vol pot for the monitors and find a certian spot where the static is minimal, but when I move either the pot or the fader the static comes back. Also, with both the slider and the pot turned completely down the static is pretty loud. Lastly, all the while the unit is on, the leds for the groups will flicker without any signal to them.
That's all I have now. Any information regarding these matters would be helpful.
|
|
|
|
Posts in this topic
abelsna Tascam M-2600 Mkii Mon 10 Sep 2007, 20:14 Mac Daddy abelsna,
The Tascam M-2600 MK-II is a beautiful R... Tue 11 Sep 2007, 15:36 Top of http://www.sweetwater.com/publications/swe...liday... Tue 11 Sep 2007, 15:50 abelsna Hey Mac Daddy
Thanks for the reply. Its the 32-ch... Thu 13 Sep 2007, 18:13 Rhsilverberg QUOTE (abelsna @ Thu 13 Sep 2007, 13:13) ... Fri 14 Sep 2007, 17:56 Mac Daddy abelsna,
You can get a PDF from Tascam to answer ... Fri 14 Sep 2007, 11:37 Jim Hoyland I haven't used this console, but from a quick ... Fri 14 Sep 2007, 12:49 alexrecording Citation (Jim Hoyland @ Fri 14 Sep 2007, 13... Sun 28 Sep 2008, 16:56 Top of Hi, Have a read of this, I used one of these conso... Fri 14 Sep 2007, 16:55 abelsna Mac Daddy; you mentioned e PDF from tascam. Can i ... Fri 14 Sep 2007, 20:59 Mac Daddy abelsna,
Tascam's website will have the PDF, ... Sat 15 Sep 2007, 04:54 abelsna Hey
Ok, so now i have checked the console out. No... Sat 22 Sep 2007, 10:44 Mac Daddy {JBassman, Thursday April 16, 2009. 22:13 I have r... Fri 17 Apr 2009, 10:44 JBassman Well it is a used console. So I guess I am going ... Fri 17 Apr 2009, 14:38
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
|
|