MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visitors connected
Welcome Guest
> Alesis Multimix 8 Fw, Working with a Alesis Multimix 8 FW and macbook 2.4(white)
kactus
post Wed 17 Dec 2008, 19:19
Post #1


Newbie


Group: Members
Posts: 20
Joined: 03-Feb 03
From: Lisbon - PT
Member No.: 11,396




Hello,

I've been working with a M-Audio FW410 for the past 4 years, with no problems, live and studio, using max/msp, logic pro, peak and protools m-powerd on 2 computers: an old powerbook G4/867 and a slight newer Imac G5/1.8.

The FW410 is ok, nothing to write home about, but it works in every condition, be it recording from phantom powerd mics live, or tracking 8 to 16 track music studio project or video soundtrack...

I bought one of the last (at least here, where I live, in Lisbon, Portugal) surviving 2.4 white macbooks with FIREWIRE!!!. Going from a G4 Titanium, is quite a leap, he's really fast with just 2GB of ram, that shares with the graphic board, running 10.5.6...

I'm seeking advise or experiences on the Alesis Multimix 8 FW mixer, it's a small analog mixer with a multichannel firewire interface built-in and is incredibly cheap. I keep on reading on the web, lots of problems with this mixer on the PC side, usually driver related, or the lack of 6 pin FW connections on PC's laptops... but almost none on the mac side.
Does it work ok, for multitracking? Bus powered? are the pre's clean enough? i know they are not prestine...
I know there are much better mixers/FW interfaces, Mackie, M-Audio, but they cost much more and are big to carry around on a bagpack, besides it can act as a small analog mixer for laptop work in the field where is going to work most of the time...


Please some help is needed,

Thank you for your patience,
CS

This post has been edited by kactus: Wed 17 Dec 2008, 19:29
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
rynn
post Thu 18 Dec 2008, 07:33
Post #2


Newbie


Group: Members
Posts: 6
Joined: 20-Jul 06
From: Bucharest - RO
Member No.: 81,603




I had a soundcard, usb, Alesis IO2.
On Thomann the specifications : ASIO, Mac !
At home?
ASIO was a fake ASIO as an input monitoring cross-over.
I was hearing the input fine, on recording, but when I have played , the guitar was veeery delayed.
I realize that it doesn't have ASIO when I use a VST instrument.
The latency was so high that I return this piece of s(orry) in 2 days.
And that was on PC.
My iMac G5 was able only to see that it has something on usb... even say it is a IO2...
but it didn't see it at audio devices.

So, you better test it before...
Go to the top of the page
 
+Quote Post



Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Lo-Fi Version - Tue 18 Feb 2025, 12:48
- © MacMusic 1997-2008