My G5 Is Under Repair…, I'm a poor lonesome moderator |
Wed 7 Jun 2006, 23:38
Post
#1
|
|
Moderator In Chief (MIC) Group: Editors Posts: 15,189 Joined: 23-Dec 01 From: Paris - FR Member No.: 2,758 |
Well, I wasn't a lot around for 8 days as my G5 1.8 from 2003 decided to freeze on spot since last wednesday. It freezed at choice during boot (rotating thing), loading OS X (blue screen) or right during/after login.
The lithium battery was dead but not at first when I checked it, when I could change it it went slightly more "normal" as I could try to start from the Apple Hardware Test. Else I could only boot in Open Firmware and Single User Mode. When I tried to startup on the install CD/DVD of 10.2.7, panther, tiger it froze too. However, after the lithium battery change I could install a 10.2.7 on the remaining drive (freeze in the middle but the system seems 100% on the drive). The drives were OK, as the RAM (checked with memtest, while in SUM it can test 97% of you RAM including lower part not available another way), I counsel Applejack too which enables you to check drives, permissions, clean caches, check preferences while in SUM. When I tried the AHT i went into something I found out is a commun bug instead of launching AHT i ended up in OF with this: CODE Invalid memory access at %SRR0: 000000000.6000d300 %SRR1: 100000000.40003030 Pretty impressive… but not meaning a lot. As I knew my RAM was ok (even bought 1 GB more to check), the drives too, I tried in turn without the DVD burner, each SATA drives. I had no graphic card to try but overall it looks bad, only the hot pot, the temp sensors, the motherboard and the CPU are left, and no Applecare I have either (sorry Mr Apple, too expensive and never a mac has left me this way, NEVER). It's at the repairshop here in Paris since yesterday, and I ressucitated ye olde timer BW G3 last evening. I'll buy tomorrow a FW external enclosure for the SATA drive on which I had saved my keychains/mail/etc as here I have no mail (it's my old mail database but I'm under tiger for a few months now and the databases are not compatible). So in the end, it looks like it's something on the motherboard wich is blown in some way, so it'll $$$ in the end I know chips/components do die, but it's heartbrake, this was a fabulous computer. I'll know for sure in ten days. Really, I need a macbook… (and no money for it s…t!) -------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
Replies
Thu 15 Jun 2006, 22:45
Post
#2
|
|
Moderator In Chief (MIC) Group: Editors Posts: 15,189 Joined: 23-Dec 01 From: Paris - FR Member No.: 2,758 |
G5 is "under analysis" since yesterday…
The G3 (BW 400) is ok, but not thriving. Difficult to do my job here with it it's still slow even if it's better than under panther. Upon the account recovery (not cloning, just recover the few files I really need -keychains, Mail databases, Adium databases (for Adium), safari prefs (cookies, URLs…)- was WAY easier with an exact config of users than starting up from the SATA drive I had my files on which has the right user, but not in the same creation position… from the Tiger on the SATA drive, lots of problems with permissions (same user though), from the same config worked like a charm. -------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
Posts in this topic
lepetitmartien My G5 Is Under Repair… Wed 7 Jun 2006, 23:38
lepetitmartien Well, on the SATA front, no enclosure, all the one... Fri 9 Jun 2006, 17:27
lepetitmartien While browsing the manufacturer website I found ou... Sat 10 Jun 2006, 00:17
lepetitmartien The G3 is tigerized now! It's working grea... Wed 14 Jun 2006, 04:01
thegrapeguy Sorry to hear about your G5. Mine is demented. B... Sat 17 Jun 2006, 12:57
lepetitmartien As mine is under analysis since Wednesday I wonder... Sun 18 Jun 2006, 19:40
lepetitmartien To se the whole environnement in OF: - type print... Sun 18 Jun 2006, 20:31
thegrapeguy My exact G5 is the PowerMac G5 2.7. The spec shee... Mon 19 Jun 2006, 13:25
lepetitmartien Go$$$hhh the price… Phone call f... Tue 20 Jun 2006, 04:02
lepetitmartien It's the CPU, and the bill will be 470.27€, wh... Fri 23 Jun 2006, 03:07
LWinston QUOTE (lepetitmartien @ Fri 23 Jun 2006, 02... Sat 1 Jul 2006, 00:28
lepetitmartien Update on Tiger on the G3: 9 times out of 10, I ha... Tue 27 Jun 2006, 15:02
Mac Daddy Yo, lepetitmartien! Who knows what to say to... Thu 29 Jun 2006, 04:42
lepetitmartien Because it has never been of use for desktop compu... Sat 1 Jul 2006, 18:19
lepetitmartien Well, on the SATA front, no enclosure, all the one... Fri 9 Jun 2006, 17:27
lepetitmartien While browsing the manufacturer website I found ou... Sat 10 Jun 2006, 00:17
lepetitmartien The G3 is tigerized now! It's working grea... Wed 14 Jun 2006, 04:01
thegrapeguy Sorry to hear about your G5. Mine is demented. B... Sat 17 Jun 2006, 12:57
lepetitmartien As mine is under analysis since Wednesday I wonder... Sun 18 Jun 2006, 19:40
lepetitmartien To se the whole environnement in OF: - type print... Sun 18 Jun 2006, 20:31
thegrapeguy My exact G5 is the PowerMac G5 2.7. The spec shee... Mon 19 Jun 2006, 13:25
lepetitmartien Go$$$hhh the price… Phone call f... Tue 20 Jun 2006, 04:02
lepetitmartien It's the CPU, and the bill will be 470.27€, wh... Fri 23 Jun 2006, 03:07
LWinston QUOTE (lepetitmartien @ Fri 23 Jun 2006, 02... Sat 1 Jul 2006, 00:28
lepetitmartien Update on Tiger on the G3: 9 times out of 10, I ha... Tue 27 Jun 2006, 15:02
Mac Daddy Yo, lepetitmartien! Who knows what to say to... Thu 29 Jun 2006, 04:42
lepetitmartien Because it has never been of use for desktop compu... Sat 1 Jul 2006, 18:19
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members: