 Lots Of Crackles When Recording In Powerbook |
 Mon 16 May 2005, 02:31
Post
#1
|
|
 Member  Group: Members Posts: 66 Joined: 11-Oct 04 From: - PT Member No.: 52,995  |
Hi
I have a Powerbook 15" 1.67hz 512 mb ram and a 80gb 5400rpm hard drive and a Terratec Phase 24 firewire soundcard. I have installed all my software ( Logic Pro 7.01 and Kontakt 2.01 ) and started to do some recordings. I was using a loop in track 1 , a EVP 88 with a tape delay and nothing else. I recorded thru the digital ins a 24 bit stereo file coming from a 01V Yamaha digital mixer. When I started to listen to the audio files ( 15 to 20 minutes )they were good in some places and terribly bad in others with lots of crackles. Does the OSX run some kind of background application that was interfering with the recording process ? Are there any tips to fine tune OSX in a Powerbook for audio production ? Are my Powerbook specs enough for this job or do I have to buy an external disk just to record a simple 24 bit stereo file ? Thank you Alex |
 |
 
|
 |
Replies
|
Mon 16 May 2005, 21:55
Post
#2
|
|
|
Newbie Group: Members Posts: 5 Joined: 09-Feb 05 From: New York - US Member No.: 60,149 |
i use a powerbook with worse specs to record and dont have any problems. try playing with/removing each component, recording in analog, recording without mixer, etc, just to see which piece might be a problem.
|
|
|
|
Posts in this topic
camarao Lots Of Crackles When Recording In Powerbook Mon 16 May 2005, 02:31
banevt Its always a good idea to record your audio tracks... Mon 16 May 2005, 07:26 gdoubleyou Max out your RAM, with 512MB you are forcing the O... Mon 16 May 2005, 21:44 camarao Thank you !
I used a Pentium III 800mhz with ... Mon 16 May 2005, 22:29 PristineRec Your computer is doing just fine. The problem you... Tue 17 May 2005, 06:26 kmslavik Digital Sync Problems
The problem will NOT be sol... Wed 18 May 2005, 14:14 PristineRec That is correct. That is why I included "make... Thu 19 May 2005, 04:34
camarao Well...I've just bought a Lacie Firewire drive... Sun 22 May 2005, 00:29 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
