Digital Performer 4.5, Le TEST Options

[deeklash]

Salut j'ai Reçu Dp 4.5 des states je suis en train de le connaître et c'est magique je peux déjà avancer une chose personne ne doit me prendre ni ma meuf ni dp 4.5
les résultats du test bientôt
@+

[lepurestyle]

et..
je ne parviens toujours pas à installer mes plugs TDM&RTAS...
ou dois-je les mettre..?
merci.. j' ai pas la doc..  BONNE ANNEE... que le son soit avec vous.

How do I use RTAS plug-ins in Digital Performer?


RTAS plug-ins have certain rules for how they must be used (these rules are the same as in Pro Tools).



To use RTAS plug-ins, you must:

Run Digital Performer 4.5 or higher

Use DAE as the Audio System

Place the RTAS plug-in on a voice track

Assigning the voice of the track to Automatic

Place it on an insert in the Mixing Board above (before) a TDM plug-in



You cannot use an RTAS plug-in:

In Digital Performer 4.12 or earlier

While MAS (MOTU Audio System) is the selected Audio System

On an Aux or Master Fader Track

On an insert beneath (after) a TDM plug-in



Also, make sure that your RTAS plug-ins are located in Library/Application Support/Digidesign/Plug-Ins. Lastly, check if the plug-in works in Pro Tools. If you do not see the plug-in while in Pro Tools, you will not see it while under DAE in Digital Performer.

et aussi très important (voire frustrant pour les Pro Toolseurs d'en bas) :

Can I use RTAS plug-ins with my Mbox or 002 in DP 4?


RTAS plug-ins are available only under DAE, and DAE is only for Mix or TDM hardware.



Since outside of Pro Tools you must use LE hardware with a CoreAudio driver, you don't have access to DAE with an Mbox or 002—meaning you can't use RTAS plug-ins.


For more info on using RTAS plug-ins under DAE in DP 4.5, check out the tech note,

This post has been edited by lepurestyle: Thu 6 Jan 2005, 21:01