 Latency & Buffer Issues--motu & G4, need settings help |
 Tue 21 Feb 2006, 21:17
Post
#1
|
|
 Newbie Group: Members Posts: 4 Joined: 21-Feb 06 From: Lakeland - US Member No.: 77,203  |
Hey everyone, I'm new here, and this seemed like the closest area for the subject matter, so here goes...
I have an old G4 dual 450 mhz, running tiger. I use it exclusively for DP 4.6. The audio hardware is a motu 24i based off of the 324 card. I am having really bad latency issues when tracking. I have to go to hardware driver setup and take the buffer down to like 64 just to make it tolerable. When I mix, I have to go back and reset it to 1024. My machine has 2 gigs of ram (maxed out) and I'm using 2 hard disks (one system, one audio data). My machine has tracked all 24 simultaneously without any problems, but when I try to record one track while playing back as little as 4 previous tracks, it tells me that the operation has exceeded playback capability. I'm new to DP, motu, and macs...this was just my first step towards a halfway-decent DAW setup. Is there anything else I can do to fix the problem? Cuemix is not compatible with a 324 system under OS X. Is there anything I can do without spending more money right now? |
 |
 
|
 |
Replies
(1 - 3)
 Wed 22 Feb 2006, 01:23
Post
#2
|
|
 Moderator In Chief (MIC)  Group: Editors Posts: 15,189 Joined: 23-Dec 01 From: Paris - FR Member No.: 2,758 |
I think you should bounce a bit, it'll help. right now you ask the drive to read 24 tracks and write another one, it may be the limit in your case…
-------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
|
|
Wed 22 Feb 2006, 05:42
Post
#3
|
|
|
Newbie Group: Members Posts: 4 Joined: 21-Feb 06 From: Lakeland - US Member No.: 77,203 |
it will have playback problems if I try to record one track even with as little as 3 or 4 existing tracks...it should be able to handle WELL beyond that load, right? I mean, that's with no plugins active or anything...just straight audio playback and record.
|
|
|
|
|
Wed 22 Feb 2006, 14:08
Post
#4
|
|
 Advanced Member  Group: Members Posts: 495 Joined: 12-Oct 01 From: Chandler - US Member No.: 2,003 |
Yes, you should be able to handle well beyong that load. I had a huge latancy issue with the 828. I canot remeber how I got rid of it. Have you tried using AudioDesk 2.xx that came with the MOTU? Also running at 24 bit 96kHz may be a bit taxing.
-------------------- kaboombahchuck
------------------------------------------------------------------------------- |
|
|
|
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
