MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visitors connected
 
Reply to this topicStart new topic
> Digital Glitch using Adat, problem 1 with recording system
Cpt Horse
post Fri 25 May 2001, 07:29
Post #1


Newbie


Group: Members
Posts: 11
Joined: 25-May 01
From: Australia
Member No.: 703




I've Being using (for quite some time now, about 4years)

Mac G3 266MHz 96meg ram
OS 7.6
Korg 1212 i/o audio card
Alesis Adat
Cubase v3.5
all running at 48kHz sample rate
the audio card is the master time clock source
the adat sync to the audio card

i use the Adat as a digital interface with cubase
eg. 8 channels analogue directly in to the adat then routed via the optic cable to the korg 1212 i/o.This gives me 12 channels of simutanous recording with the analogue and digital inputs on the audio card

this system is rock solid and it has never failed me as a basic recording tool.
and is used in a profesional studio.

But with one little problem thats now starting to bother me.
I get what apears as a random digital glitch while recording,
its a 'tick' noise, it will peak above 0db and only on any one channel of the incoming 8 from the adat. it might happen once every 5 to 10 min or once a day. in the pass i would just zoom in on the recorded data and edit it out.  

what i want to know is if anybody else has a simular system as the one above with the same problem or if any one might know what might be coursing it?

thanks.
Cpt Horse  
Go to the top of the page
 
+Quote Post
DigitMus
post Fri 25 May 2001, 17:41
Post #2


Rookie
*

Group: Members
Posts: 41
Joined: 20-May 01
From: Port Charlotte
Member No.: 658




My first guess would be hard drive issues. Are you recording to the drive that has your system/recording software on it? If not, is your second drive on the same buss as the startup drive? Do you optimize the drive before recording to ensure CONTIGUOUS free space? Are there any background apps running that might be trying to access the drive/buss during recording? Are you recording to a high speed (7200 or 10,000 rpm) drive? Does the drive have thermal calibration disabled? Do you use a custom system set-up for recording (i.e. all extensions/control panels not needed for recording disabled)?
Any of the above factors could introduce glitches in the recording process, and there are probably some I haven't thought of yet. I've used the 1212 IO/ADAT combination on a powermac 7300 & a B&W G3-400. I use a separate ( high speed) drive on its own buss, optimize before recording, custom system configuration, virtual memory off & lots of ram assigned to [Cubase, Deck II, whatever].
I hope some of this information is helpful.

Scott
Go to the top of the page
 
+Quote Post
Cpt Horse
post Sat 26 May 2001, 02:20
Post #3


Newbie


Group: Members
Posts: 11
Joined: 25-May 01
From: Australia
Member No.: 703




yes i do optimize,no background apps running,have a custom system setup

thanks
I'll might have to try a second drive (limited buget might not let do this for some time unless i can find something in one of those dark courners of the storage room.....arrgghh!)

becouse this system is used only as a dedicated recording machine to put roughs down for larger projects only 1 drive was installed cheap and nasty (its only 4 gigs..but its fast)
------
I would then, after recording use the adat as a DA converter from cubase to give me 8 sends for outboard effects etc.I have never heard or seen this glitch doing this.

I would have assumed it was maybe a adat prob due to the glitch only being on one of the incomming optical channels and only when im using the adat in this way
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Welcome Guest
Contribute
Lo-Fi Version - Mon 23 Dec 2024, 19:37
- © PcMusic 1997-2007