MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visitors connected
 
Reply to this topicStart new topic
> Midi Routing, how can i play my Akai...?
sonoton
post Thu 24 Apr 2003, 13:29
Post #1


Newbie


Group: Members
Posts: 2
Joined: 23-Apr 03
From: London - UK
Member No.: 16,653




I've recently bought an Edirol PCR30. I've had no problem to play/control softsynth (reason,pro52,fm7....) via IAC bus but i can't find a way to play/control or record my Akai S3000 into PTF.
This is my setup

*iMac DV 400Mhz

*MOTU midi express XT
midi 1: Akai S3000
smpt in : Umatic video deck

*Edirol PCR30
usb port

I'm not sure where my sampler should be in my setup ( to play/record in PTF).

I've tried with using the physical midi port O/I on the Edirol to O/ I on the sampler -no success. I've tried daisy chained the Edirol and Akai to the midi 1 of Midi express, but...nope.....
Could that be my OMS settings?

I don't know it seems like i've tried so many things... i'm a bit confused.

I would appreciate any fresh thoughts to my problem

Thanks in advance
Go to the top of the page
 
+Quote Post
Synthetic
post Thu 24 Apr 2003, 14:38
Post #2


Maniac Member
******

Group: Members
Posts: 821
Joined: 25-Jun 01
From: Springfield - US
Member No.: 1,082




ok... do you have any audio interface or how are you running actual "sound" to your imac? I just wanted to make sure you knew that midi doesn't transmit audio and you never mentioned how you had sampler audio output connected to imac unless that is what the Umatic video deck does for you. And if that is the case... PTF might not be able to pull in audio from that. I think I remember that it only works with the built in sound manager and thus audio input is limited to the mic input maybe but not sure.

But ideally, you would want to connect midi out from Edirol to the Akai midi input and then you would need to run the audio ouput of Akai back into the imac either via mic input or a USB or Firewire audio interface. You may still be limited what is possible with the ProTools Free app (that is why its free). wink.gif


--------------------
----------------------------------------
<span style='font-size:18pt;line-height:100%'>Synthetic Tone</span>
Click above for totally original electronic music, art, & photos.
Click below to become an active member of the MacMusic.org site..

<span style='font-size:15pt;line-height:100%'>Become An Active Member</span>

G4 550mhz Tibook & Brand Spankin New Dual G5 2Ghz Power Mac with Tiger.
So long old OS9 apps :(
Go to the top of the page
 
+Quote Post
sonoton
post Fri 25 Apr 2003, 15:41
Post #3


Newbie


Group: Members
Posts: 2
Joined: 23-Apr 03
From: London - UK
Member No.: 16,653




The audio from the sampler is going into a mixer. I will bounce the midi to audio at a later stage (via line input of the sound manager).
And as for the Umatic, well i'm doing the sound design for a documentary so I need sound to be synched up with the picture. I'm feeding the smpt timecode into midi express which sends a midi timecode to PTF. And that runs online perfectly! smile.gif

But what i can't figure out is how can i play my samples from the midi keyboard. At the moment i can play my samples from the midi track (piano roll down) within PTF fine. The sampler midi I is connected to the midi keyboard O (thanks Synth tone) which is conected to the iMac via USB port. Still it's like the midi keyboard is invisible. (and i ticked the various ports of the Edirol-two usb ones- and the sampler in Midi Input device Menu).

Any clues? sad.gif


Thanks for your help.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Lo-Fi Version - Sat 9 Nov 2024, 19:43
- © 440 Forums 2011